Dariusz (Derek) Ceglarek

Honorary Associate

The International Digital Laboratory, University of Warwick
Coventry CV4 7AL United Kingdom
UK,  

Ph: +4402476572681
darek@engr.wisc.edu


Profile Summary

Professor Ceglarek joined the University of Wisconsin-Madison in 2000 and is currently at the University of Warwick, UK. His professional positions since 2000:

2000 Assistant Professor, Department of Industrial and Systems Engineering, University of Wisconsin-Madison

2003 Associate Professor, Department of Industrial and Systems Engineering, University of Wisconsin-Madison

2005-2008 Professor, Department of Industrial and Systems Engineering, University of Wisconsin-Madison

2007-Present Professor and EPSRC Research Chair, The Digital Laboratory, WMG, University of Warwick, UK

2008-Present Visiting Professor, Department of Industrial and Systems Engineering, University of Wisconsin-Madison

Publications

All journal papers are available as downloadable pdf files at the Extended Homepage (MA/RS Website) or at the Digital Laboratory Website, University of Warwick, UK (DPLM)

2009

  1. Mannar K., Ceglarek D., \"Functional Capability Space and Optimum Process Adjustments for Manufacturing Processes with In-Specs Failures,\" IIE Transactions , , Vol. 41.
  2. Prakash, L. Eduardo Izquierdo, D. Ceglarek, \"Functional Process Adjustments for No-Fault-Found Product Failures in Service Caused by In-tolerance Faults,\" Annals of CIRP, , Vol. 58(1).
  3. Loose, J-P., Zhou, S., Ceglarek, D., \"Embedding GD&T into dimensional variation models for multistage machining processes,\" International Journal of Production Research, , Vol. 47, Issue: 10.
  4. Wang, H, Ceglarek, D., \"Product and Process Modeling and Variation Propagation Analysis at Preliminary Design Phase for Multi-station Sheet Metal Assemblies(MMS),\" Assembly Automation, , Vol. 29, No. 2.
  5. Huang, W., Phoomboplab, T., Ceglarek, D., \"Process Capability Surrogate Model-Based Tolerance Synthesis for Multi-Station Manufacturing Systems (MMS),\" IIE Transactions, , Vol. 41, pp. 309-322.

2008

 

  1. Phoomboplab, T., Ceglarek, D., \"Process Yield Improvement through Optimal Design of Fixture Layout in 3D Multi-station Assembly Systems,\" ASME Trans., Journal of Manufacturing Science and Engineering, Vol. 130, No. 061005.
  2. Loose, J., Zhou, S., Ceglarek, D., \"Variation source identification in Manufacturing Processes Based on Relational Measurement of Key Product Characteristics,\" ASME Trans., Journal of Manufacturing Science and Engineering, Vol. 130, No. 001007.
  3. Kong, Z., Ceglarek, D., Huang, W., \"Multiple Fault Diagnosis Method in Multi-station Assembly Processes Using Orthogonal Diagonalization Analysis,\" ASME Trans., Journal of Manufacturing Science and Engineering, Vol. 130, No. 031014.

2007

  1. Huang, W., Lin, J., Zhou, S., Ceglarek, 2007, \"Stream-of-Variation (SOVA) Modeling II: A Generic 3D Variation Model for Rigid Body Assembly in Multi Station Assembly Processes,\" ASME Trans., Journal of Manufacturing Science and Engineering, Vol. 129(4), pp. 832-842.
  2. Huang, W., Lin, J., Bezdecny M., Zhou, S., Ceglarek, 2007, \"Stream-of-Variation Modeling I: A Generic 3D Variation Model for Rigid Body Assembly in Single Station Assembly Processes,\" ASME Trans., Journal of Manufacturing Science and Engineering, Vol. 129(4), pp. 821-831.
  3. Phoomboplab, T., Ceglarek, D., 2007, \"Design Synthesis Framework for Dimensional Management in Multi-Station Assembly Systems,\" Annals of CIRP, Vol. 56(1), pp. 153-158.
  4. Loose, J-P., Zhou, S., Ceglarek D., 2007, \"Kinematic Analysis of Dimensional Variation Propagation for Multistage Machining Processes with General Fixture Layouts,\" IEEE Trans. on Automation Science and Engineering, Vol. 4(2), pp. 141-152.

2006

 

  1. Lee, N.K.S., Yu, G., Joneja, A., Ceglarek, D., 2006, \"Modeling and Analysis of Assembly in the Presence of Workpiece Surface Roughness and Part Dimensional Error,\" the International Journal of Advanced Manufacturing Technology, Vol. 31 No. 5-6, pp. 528-538.
  2. Chen, Y., Ding, Y., Jin, J., Ceglarek, D., 2006, \"Integration of Tolerance and Maintenance Design for Multi-station Manufacturing Processes,\" IEEE Trans. On Automation Science and Engineering, Vol. 3(4), pp. 440-453.
  3. Mannar, K, Ceglarek D.,Niu, F., Abifaraj, B., 2006, \"Fault Region Localization (FRL): Product and Process Improvement Based on Field Performance and Distributed Manufacturing Measurements. ,\" IEEE Trans. on Automation Science and Engineering, Vol. 3(4), pp. 423-439.
  4. Kawalec, A., Wiktor, J., Ceglarek, 2006, \"Comparative Analysis of Tooth Root Strength Using ISO and AGMA Standards in Spur and Helical Gears with FEM-based Verification,\" ASME Trans., Journal of Mechanical Design, Vol. 128, No. 3, pp. 1141-1158.
  5. Kong, Z., Kumar, R., Gogineni, S., Zhou, Y., Ceglarek, D., 2006, \"Analysis of Composite Tolerance Modes in Multi-Station Assembly Using Stream of Variation Model,\" Trans. of NAMRI, Vol. 34, pp. 469-476

2005

 

  1. Wang, H, Ceglarek, D., 2005, \"Quality-driven Sequence Planning for Compliant Structure Assemblies,\" Annals of CIRP, Vol. 54/1, pp. 31-35.
  2.  Kong, Z., Huang, W., Ceglarek, D. 2005, \"Visibility Analysis for Assembly Fixture Calibration using Screen Space Transformation,\" ASME Trans., Journal of Manufacturing Science and Engineering, Vol. 123, No.3, pp. 622-634.
  3. 33. Ding, Y., Jin, J., Ceglarek, D., Shi, J., 2005, \"Process-Oriented Tolerancing for Multi-station Assembly Systems,\" IIE Transactions on Design and Manufacturing, Vol. 37, No. 6, pp. 493-508.

2004

  1. Camelio, J., Hu, S.J., Ceglarek, D., 2004, \"Impact of Fixture Design on Sheet Metal Assembly Variation,\" Journal of Manufacturing Systems, Vol. 23, No. 3, pp. 182-193.
  2. Takata, S., Kimura, F., Van Houten F.J.A.M., Westkamper, E., Shpitalni, M., Ceglarek D., Lee, J., 2004, \"Maintenance: Changing Role in Life Cycle Management,\" Annals of CIRP, Vol. 53/2, pp. 643-655. Keynote Paper for the 2004 CIRP General Assembly.
  3. Mannar, K., Ceglarek, D., 2004, \"Continuous Failure Diagnosis for Assembly Systems using Rough Set Approach,\" Annals of CIRP, Vol.53/1, pp.39-42.
  4. Huang, W., Ceglarek, D., 2004, \"Tolerance Analysis for Design of Multistage Manufacturing Processes using Number-Theoretical Net Method (NT-net),\" International Journal of Flexible Manufacturing Systems, Vol. 16, No.1, pp.65-90.
  5. Ceglarek, D., Huang, W., Zhou, S., Ding, Y, Kumar, R., Zhou Y., 2004, \"Time-based Competition in Manufacturing: Stream-of-Variation Analysis (SOVA) Methodology- Review,\" International Journal of Flexible Manufacturing Systems, Vol.16, No.1, pp.45-64.
  6. Ceglarek, D., Jin, J., 2004, \"Modeling and analysis for complex production systems. Position statement,\" International Journal of Flexible Manufacturing Systems, Vol.16, No.1, pp. 5-9.
  7. Huang, W., Kong, Z., Ceglarek, D., Brahmst, E., 2004 \"The Analysis of Feature-based Measurement Error in Coordinate Metrology,\" IIE Transactions on Design and Manufacturing, Vol. 36, No. 3, pp. 237-251.

 

Links

Education

  • Diploma 1987, production engineering, Warsaw University of Technology
  • Ph.D. 1994, mechanical engineering, University of Michigan-Ann Arbor

Research Interests

  • Design and manufacturing with an emphasis on multistage production systems convertibility, scalability, and diagnosability, ramp-up time, and variation reductions
  • Integration of statistical and evolutionary computational methods with engineering models for system diagnosability and self-healing analysis
  • Sensing systems/networks in manufacturing
  • Reconfigurable/reusable assembly systems
  • Lean Healtcare

Awards, Honors and Societies

  • 2006 Fellow of CIRP (College International pour l\'Etude Scientifique des Techniques de Production Mecanique; International Academy for Production Engineering) head quartered in Paris, France.
  • 2005 Associate Editor, ASME Transactions, Journal of Manufacturing Science and Engineering,
  • 2003 Associate Editor for the IEEE Transactions on Automation Science and Engineering.
  • 2003 CAREER Award, National Science Foundation.
  • 2002 Best Paper Award Finalist, Japan-USA Symposium on Flexible Automation, Li, H.F., Ceglarek, D., 2002, \"Optimal Trajectory Planning for Material Handling of Compliant Sheet Metal Parts,\" Proc. of the Japan-USA Symposium on Flexible Automation, Hiroshima, Japan, July 15-17, 2002, also in Trans. of ASME, Journal of Mechanical Design, Vol. 124, No. 2, pp. 212-222.
  • 2001 Best Paper Award from the ASME Design Engineering Division (This award was granted to a single paper selected among 64 papers in the area of design for manufacturing presented during the 2001 ASME Design Technical Engineering Conferences (DETC\'01) in Pittsburgh, PA).
  • 2000 Best Paper Award from the ASME Manufacturing Engineering Division (This award was granted to a single paper selected among all 135 papers in the area of manufacturing presented during the 2000 ASME International Mechanical Engineering Congress and Exposition in Orlando, FL).
  • 1999 Outstanding Research Scientist Award from the College of Engineering, University of Michigan-Ann Arbor.
  • 1998 Dell K. Allen Outstanding Young Manufacturing Engineer Award from the Society of Manufacturing Engineers (SME).
  • 1995 Manufacturing Excellence Award for the project \"Diagnostics and Variation Reduction of Closure Panel Assembly Process\".

Accomplishments of students in past 5 years

  • 2005 GOLD AWARD for the UW-Madison IIE Student Chapter #884 at the 2005 National Chapters Recognition Competition (Faculty Advisor: Ceglarek).
  • 2004 Anupam Singh, IE graduate student, while doing his research with Dr. Ceglarek, won the 1st place in the Madison APICS Student Paper Competition for his paper \"Supplier performance evaluations in an assembly plant-a simplified approach.\" (http://www.madisonapics.org/ApicsStudents.htm). The Madison APICS chapter sponsors a local paper competition along with the Donald W. Fogarty International Student Paper Competition to actively encourage the professional development of students interested in the field of resource management.
  • 2003 Nishant Khattar, ECE/IE graduate student, while doing his Independent Study at GE Consumer Products, Louisville, KY and supervised by Dr. Ceglarek, was awarded GE Management Award and commendation from GE Consumer Products for his project on \"Six Sigma Methodologies for quality improvement: Dispenser Water Dribble during Refrigerator Manufacturing Process.\"
  • 2002 Wenzhen Huang, IE Ph.D. student, received 2002 INFORMS QSR Section Best Student Paper Award, for the paper \"Mode-based Decomposition of Part Form Error by Discrete-Cosine-Transform with Implementation to Assembly and Stamping System with Compliant Parts\".
  • 2002 Osman Ozcanli, IE undergraduate student, while doing his Independent Study with me was awarded 2002 Tong Prototype Prize ($2,500) for his product called Book Hand Pack - O.Z. Pack. Business\'s student Puneesh Malkani was part of the winning team.

 

Profile Summary

Professor Ceglarek joined the University of Wisconsin-Madison in 2000 and is currently at the University of Warwick, UK. His professional positions since 2000:

2000 Assistant Professor, Department of Industrial and Systems Engineering, University of Wisconsin-Madison

2003 Associate Professor, Department of Industrial and Systems Engineering, University of Wisconsin-Madison

2005-2008 Professor, Department of Industrial and Systems Engineering, University of Wisconsin-Madison

2007-Present Professor and EPSRC Research Chair, The Digital Laboratory, WMG, University of Warwick, UK

2008-Present Visiting Professor, Department of Industrial and Systems Engineering, University of Wisconsin-Madison


Update Profile